eBay Classifieds » All ads » For sale » 

Business & industrial in Montpelier

(1-6 of 6 ads)

View as:
Categories
Price [clear]
$ to
  1. Sponsored Link 5
  2.  
  1. Estate Sales, Auctions, Liquidations, HouseHold Cleanouts,Moving Sales

    We Buy/Sell/Trade Most Everything and Loan Too!!! Appliances: Stoves, Washers/ Dryers, Refrigerators, Flat Screen TVs, Laptops, Antiques, New and Used Furniture, Contractor Tools Makita, DeWalt, Milwaukee, Chainsaws, Estate Buyouts. The Trading Center est. 1978 Tues-Fri 9-4pm and Sat 9-12pm

  2. Water storage tanks

    Totes for sale 275 gallon tanks Can store water fuel oil sap Food grade are 150.00 None food grade 120.00 Cage only 50.00 Size 48 x 40 x 46 Call 603 915 0376 This ad was posted with the eBay Classifieds mobile app.

  3. Excavator - 1993 Hitachi EX200-2

    Hitachi Ex200-2 Excavator (8130 Hours) for sale. Our project is done so it's ready for yours! We are asking $27,000 OBRO. Bucket holds approximately a yard, moves a huge amount of dirt! Has a mechanical thumb. Sprockets are good, lots of life left. Final Drives are good. Tracks are a bit rough but still lots of life left. Most hydraulic hoses were replaced late 2013. Bottom window of cab is gone, otherwise entire unit is fairly tight. Email for more information!

  4. Blu-Ray 248 BluPrint Printing Machine

    Selling a Blu-Ray Commercial BluPrint Printing Machine Model No. 248 Comes with 2 new rolls of Paper Local Pickup Make an Offer!

  5. Antique Metal Lathe - Circa 1900

    Selling an Antique Metal Lathe Circa 1900 14 Inch Swing, 48 Inch between centers, Works. (Not suitable for precision machining) Local Pickup Make an Offer!

  6. 8 Cylinder BUDA Engine
    Please Contact

    Selling an 8 Cylinder BUDA Engine Local Pickup Only - Weighs Approximately 12 Tons Refurbish or For Parts Make an Offer!

  1. Can't find what you are looking for? See more ads from nearby cities.
  2. 8000lbs Electric Forklifts

    (4) 2007 Mitsubishi Model FBC40N 8000lbs capacity 48v Electric Cushion Tire Battery and Charger 218” FFT Mast 4-way valve with 4 way Hydraulic Drawbar Pin (no forks) 3000-5000 hours FOB North Attleboro, MA $6000 or Best Offer each

  3. 1998 Clausing Metosa EL2087CS (CNC Engine Lathe)

    1998 Clausing Metosa EL2087CS CNC Engine Lathe Control: Fagor 800T Swing Over Bed: 20.875" Swing In Gap: 30.75" Swing Over Cross Slide: 12.75" Distance Between Centers: 87" Spindle Nose: D1-8 Spindle Speeds: 0-1,700 RPM Spindle Motor: 10 HP Spindle Bore: 3.150" Tailstock Taper: 5 MT Tailstock Travel: 7" Machine Weight: 6,200 LBS -EQUIPPED WITH- 14 Inch, 4 Jaw Chuck Aloris Style Tool Post (6 Tools) External Transformer More Info: http://2spade.com ...

  4. 1975 Monarch Sidney MONARCH 220 (CNC Turning Center)

    1975 Monarch Sidney MONARCH 220 CNC Turning Center Control: Fanuc 15T Model: 12 14 (Series 220) Swing Over Bed: 30” Spindle Motor: 75 HP Spindle Bore: 9-7/16” Number of Turret Positions: 6 -EQUIPPED WITH- Chip Conveyor Cushman 24” 3-Jaw Power Chuck (2) Bar Feeders Fanuc X and Z Axis Drives ***Rebuilt and Retrofitted 1992*** More Info: http://2spade.com/1975MonarchSidneyMONARCH220.html

  5. 1993 Okuma LR10-M (5 Axis CNC Turning Center)

    1993 Okuma LR10-M 5 Axis CNC Turning Center Control: OSP 5020 Full Model Number: LR10-M T-2S X 200 Swing Over Bed: 17.32" Swing Over Carriage: 11.02" Swing Over Cross Slide: 9.06" Max Turn Diameter: 6.69" Max Turn Length: 7.87" Spindle Thru Hole: 3.15" Spindle Motor: 10 HP Spindle Speed: 15-6,000 RPM Number of Tools (Upper Turret): 12 Number of Tools (Lower Turret): 8 Live Tool Speed: 100-6,000 RPM Machine Dimensions: 128"L x 73"W x 65"H Machine Weight: 9,500 LBS ...

  6. 2001 Eurotech E-42S (5 Axis CNC Turning Center)

    2001 Eurotech E-42S 5 Axis CNC Turning Center Control: Fanuc 18i-T Max Turning Diameter: 8.7" Bar Capacity: 1.7" Spindle Speeds: 5,000 RPM Spindle Motor: 20 HP Number of Turret Stations: 12 Live Tooling Speed: 4,000 RPM Machine Weight: 9,500 LBS -EQUIPPED WITH- Parts Catcher Sub Spindle Live Tooling More Info: http://2spade.com/2001EurotechE42S.html

  7. 1999 Gildemeister CTX 400 SERIES 2 (CNC Turning Center)

    1999 Gildemeister CTX 400 SERIES 2 CNC Turning Center Control: Heidenhain CNC Pilot Max Turning Diameter: 16.5" Max Turning Length: 25" Bar Capacity: 2" Spindle Speeds: 25-5000 RPM Spindle Motor: 30 HP Number of Turret Positions: 12 Machine Dimensions: 150"L x 70"W x 70"H Machine Weight: 11,000 LBS -EQUIPPED WITH- Full C Axis (live tooling) Extra Turn & Live Tool Hoders More Info: http://2spade.com/1999GildemeisterCTX400SERIES2.html

  8. Commercial Mirrored Showcase 10' Wide FREE for Pick-Up by 7/31!

    This enclosed, mirrored showcase is a sturdy wood with mirrored exterior, gray laminate countertop with recessed register area, sliding rear doors, interior shelves and cubbies, and, though can't recall with 100% certainty, I believe that there may be lights inside. It measures about 40" High x 25" Deep x 120" Wide. A gorgeous way to display and protect your wares! Photos available on request. Must be picked up before or on 7/31. Outside commercial delivery may be arranged.

  9. 2000 Haas Model VF-0EB 4-Axis CNC Vertical Machining Center

    Haas Model VF-0EB 4-Axis CNC Vertical Machining Center New 2000 Specifications: Table Size: 36" x 14" Maximum Table Load: 3,000 LBS Spindle Nose To Table Top: 4" - 24" X-Axis Travel: 30" Y-Axis Travel: 16" Z-Axis Travel: 20" Rapid Traverse Rate X, Y & Z Axes: 710 IPM Cutting Feed Rate: 0.1- 500 IPM ...

  10. 1993 MAZAK SUPER QUICK TURN 15M CNC TURNING CENTER

    1993 MAZAK SUPER QUICK TURN 15M CNC TURNING CENTER *LIVE TOOLS * C AXIS * PARTS CATCHER * BF INTERFACE SPECIFICATIONS: Max. Swing...............................................20.9 In Swing Over Carriage.................................20.9 In Max. Machining Diameter.........................11.75 In Max. Machining Length............................20.78 In Max. Bar Work Diameter..........................2.01 In X-Axis Stroke............................................7.12 In Z-Axis Stroke.......... ...

  11. 1995 ACCURPRESS Model 710010 Hydraulic Press Brake

    ACCURPRESS Model 710010 Hydraulic Press Brake New 1995 Specifications: Tonnage Capacity: 100 Ton Overall Length of Bed & Ram: 10', Distance Between Housings: 8'-4" Bending Capacity: 10 ga. x 10' or 3/16" x 8' Back Gauge Length: 24" Stroke Length: 8" Shut Height: 6" Open Height: 14" Throat Depth: 10" Speeds: High Approach- 150 IPM Slow Forming- 25 IPM Fast Return- 250 IPM EQUIPPED WITH: Automec 2-Axis ...

  12. Dynascope
    $275

    Dynascope sold as seen in photo's with nothing else for $375.00 cash or BO. Call 978-463-6266 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  13. Varian Advance Hivolt Series 330 3A17 Lens Power Supply

    P/N OL400/103/34 Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  14. Varian HITEK SERIES 400 P/N 0L400/103/34

    Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  15. VARIAN 2A5 EXTRACTION CONTROLLER OL2500/503/05

    Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  16. VARIAN O RING E35000195
    Please Contact

    Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  17. PARKER TOGGLE VALVE 4A-U4LQ-11A0-SS  BEST OFFER

    ACCEPTING BEST OFFER ON THE ITEM Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  18. DRC ENCODER
    Please Contact

    ACCEPTING BEST OFFER ON THIS ITEM Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!

  19. HARMONIZED DRIVE
    Please Contact

    Call 978-462-8636 or email us for more details! We also will take a CC for this transaction and ship the item anywhere! Customer pays shipping!